FUSION SPLICERS & ACCESSORIES
Fiber Splice Protection Sleeves 60mm KM-60
60mm heat shrink splice protection sleeves with a stainless steel strength pin — the standard closing step of every fusion splice, in bags of 100.
60mm heat shrink splice protection sleeves with a stainless steel strength pin — the standard closing step of every fusion splice, in bags of 100.
Checked against the specifications on this page before dispatch; splicer consumables are batch-checked.
Supplied neutral; labeling per order.
Consumables and connectors are restock lines — combine them with tool orders in one shipment.
| Sleeve length | 60 mm |
|---|---|
| Strength member | Stainless steel pin, Ø1.0 mm |
| Recovered outer diameter | Approx. 2.6 mm |
| Fiber type | Single fiber, 250 / 900 µm |
| Shrink temperature | Standard splicer heater (about 90–110 °C) |
| Operating temperature | −55 °C to +105 °C |
| Packing | 100 pcs per bag |
In the box: the parts above, packed per unit. Applications: Closing and protecting fusion splices in FTTH, FTTx and backbone work · Splice trays in closures, distribution boxes and ODFs · A standing consumable on every splicing crew's van stock.
Every fusion splice leaves one weak point: a short length of bare glass where the coating was stripped away. The protection sleeve is threaded onto one fiber before splicing; after the arc, it is slid over the joint and heated in the splicer's heater oven.
Heat does three jobs at once. The outer polyolefin tube shrinks tight. The inner hot-melt adhesive liquefies and flows around the bare fiber, sealing out moisture and locking the coating ends. And the stainless steel pin inside holds the whole joint straight and rigid while it sets.
Shrunk down, the sleeve is a clear, stiff splint about 2.6 mm across: the splice can be inspected through it, coiled into a tray and forgotten — which is exactly what a splice should be.
The compact crew splicer: 4-motor core alignment and a 6-second fully automatic splice, with a power meter and
View SD-6A →
Six-motor core alignment, a 5-second splice and 11-second heat — with a power meter and a 15 mW VFL built in,
View SD-9 →
Splice-on SC connectors: fusion-welded in the splicer for a true fused joint, in a 58 mm type and a 0.9 mm typ
View KW-04 →
Replacement electrode pairs for the splicers your crews already run — Fujikura, Sumitomo, Comway, INNO, Jilong
View K-E1 →Tell us the quantity and the finish or branding you need — Silvia replies personally with factory pricing (EXW).
Email: silvia@licoom.com · sales@licoom.com
WhatsApp: +86 150 6823 2998